PCTechNotes :: PC Tips, Tricks and Tweaks » reset ink http://pctechnotes.com PC Tips,Tricks and Tweaks Sun, 05 Sep 2010 10:42:26 +0000 en hourly 1 http://wordpress.org/?v=3.0.1 How to Fix Error 27 on Canon Pixma MP145 http://pctechnotes.com/how-to-fix-error-27-on-canon-pixma-mp145/ http://pctechnotes.com/how-to-fix-error-27-on-canon-pixma-mp145/#comments Sat, 28 Mar 2009 05:12:15 +0000 slavezero http://pcremix.com/?p=1413
  • How to Fix Stop Error 0x0000007E After Installing SP3
  • How to Fix “NTLDR is Missing” Error
  • How to fix Access Denied Error when installing Windows XP SP3
  • How to fix “Windows cannot connect to the printer. Access is denied” in windows vista
  • How to Start Windows in Safe Mode
  • How to fix USB device error “This Device Cannot Start. (Code 10)”
  • How to fix “Windows XP could not start because the following file is missing or corrupt”
  • How to fix missing file WTSAPI32.DLL
  • PC Power Supply Repair Flowchart
  • Troubleshooting Tips for a new Motherboard
    • ]]>     canon-pixma-mp145Just this morning while I was about to print some documents, I encounter a E27 error on my Canon Pixma MP145 all-in-one printer. This type of error occurs when your waste ink absorber is full. The first thing I did was I clean the holder and the cartridge itself, remove excess inks, spills and some dirts but still no luck. The last solution that I did was I reset the waste ink counter which is not easy and requires lots of trials and tons of patience because it took me I think 10 times before my printer finally resets.

    1. Turn off your printer then press the Power button while pressing and holding the Stop/ Reset button.

    2. When the Power is lit, press the Stop/Reset button twice while pressing and holding the Power button.

    3. When you release the Power button and the Stop/ Reset button, your printer will move into a service mode.

    4. When the on/off lights is in green, press the Stop/Reset button 4 times. You will then notice that  each time the Stop/Reset button is pressed, the LED lights alternately in orange and green.

    5. Turn off your printer.

    6. Turn on your printer.

    7. If unsuccessful go back to first step and try again :D .

    8. If still unsuccessful don’t cry yet just repeat the above procedures until you get your desired result.

    Related posts:

    1. How to Fix Stop Error 0x0000007E After Installing SP3
    2. How to Fix “NTLDR is Missing” Error
    3. How to fix Access Denied Error when installing Windows XP SP3
    4. How to fix “Windows cannot connect to the printer. Access is denied” in windows vista
    5. How to Start Windows in Safe Mode
    6. How to fix USB device error “This Device Cannot Start. (Code 10)”
    7. How to fix “Windows XP could not start because the following file is missing or corrupt”
    8. How to fix missing file WTSAPI32.DLL
    9. PC Power Supply Repair Flowchart
    10. Troubleshooting Tips for a new Motherboard

    ]]>     http://pctechnotes.com/how-to-fix-error-27-on-canon-pixma-mp145/feed/ 47